80
ENGLISH
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting
Return to previous menu
Setting items
Setting details
Speaker Config.
(Continued)
Subwoofer
: Set the presence of a subwoofer.
•
Yes
: Use a subwoofer.
•
No
: Select when a subwoofer is not connected.
When “Front” is set to “Small”, “Subwoofer” is automatically set to
“Yes”.
Surround
: Set the presence and size of the surround speakers.
•
Large
: Use a large speaker that can adequately play back low
frequencies.
•
Small
: Use a small speaker that has inadequate playback capacity for
low frequencies.
•
None
: Select when the surround speakers are not connected.
• When “Surround” is set to “Large”, “S.Back”, “F.Height” and “F.Wide”
can be set to “Large”.
• When “Surround” is set to “None”, “S.Back”, “F.Height” and “F.Wide”
can automatically set to “None”.
S.Back
: Set the presence, size and number of surround back speakers.
•
Large
: Use a large speaker that can adequately play back low
frequencies.
•
Small
: Use a small speaker that has inadequate playback capacity for
low frequencies.
•
None
: Select when the surround back speakers are not connected.
•
2spkrs
: Use two surround back speakers.
•
1spkr
: Use only one surround back speaker. When you select this
setting, connect the surround back speaker to the left (L) channel.
Even when the “S.Back“ setting is other than “None”, sound may
not be emitted from the surround back speaker, depending on the
playback source. In this case, make “Surround Parameter” – “S.Back”
setting other than “OFF” (
v
page 74).
NOTE
When “Amp Assign” setting (
v
page 79) is other than “Normal”, you
cannot make the “S.Back” setting.
F.Height
: Set the presence and size of the front height speakers.
•
Large
: Use a large speaker that can adequately play back low
frequencies.
•
Small
: Use a small speaker that has inadequate playback capacity for
low frequencies.
•
None
: Select when the front height speakers are not connected.
NOTE
When “Amp Assign” setting (
v
page 79) is other than “Normal”, you
cannot make the “F.Height” setting.
Manual Setup
Setting items
Setting details
Speaker Config.
(Continued)
F.Wide
: Set the presence and size of the front wide speakers.
•
Large
: Use a large speaker that can adequately play back low
frequencies.
•
Small
: Use a small speaker that has inadequate playback capacity for
low frequencies.
•
None
: Select when the front wide speakers are not connected.
NOTE
When “Amp Assign” setting (
v
page 79) is other than “Normal”, you
cannot make the “F.Wide” setting.
Bass Setting
Set subwoofer and LFE
signal range playback.
Subwoofer Mode
: Select low range signals to be reproduced by
subwoofer.
•
LFE
: The low range signal of the channel set to “Small” speaker size is
added to the LFE signal output from the subwoofer.
•
LFE+Main
: The low range signal of all channels is added to the LFE
signal output from the subwoofer.
• “Subwoofer Mode” can be set when “Speaker Config.” – “Subwoofer”
(
v
page 80) is set to “Yes”.
• Play music or a movie source and select the mode offering the strongest
bass.
• Select “LFE+Main” if you want the bass signals to always be produced
from the subwoofer.
NOTE
If “Front” and “Center” for “Speaker Config.” are set to “Large”, and
“Subwoofer Mode” is set to “LFE”, no sound may be output from the
subwoofers, depending on the input signal or selected surround mode.
LPF for LFE
: Set LFE signal playback range.
•
80Hz
/
90Hz
/
100Hz
/
110Hz
/
120Hz
/
150Hz
/
200Hz
/
250Hz
Distance
Set distance from listening
position to speakers.
Measure beforehand the
distance from the listening
position to each speaker.
Unit
: Set the unit of distance.
•
Feet
/
Meters
Step
: Set the minimum variable width of the distance.
•
1ft
/
0.1ft
•
0.1m
/
0.01m
Front L
/
Front R
/
Center
/
Subwoofer
/
Surround L
/
Surround R
/
S.Back L
z
/
S.Back R
z
/
F.Height L
/
F.Height R
/
F.Wide L
/
F.Wide R
: Select the speaker.
z
When the “Speaker Config.” – “S.Back” setting (
v
page 80) is set to
“1spkr”, “S.Back” is displayed.
•
0.0ft
–
60.0ft
/
0.00m
–
18.00m
: Set the distance.
