10
Using the Radio
To use the radio:
1.
If the unit is off, press the
Power
button to power it on.
2.
Press the
Band
button to select AM
or FM. The audio from the broadcast will start
automatically.
Important:
Make sure you have properly connected the FM and AM antennae and set
the
Region
to the correct setting.
3.
To select a radio station, use the
Tuning Up/Down
buttons on the unit or the remote
control. To jump to the previous or next station with clear reception, press and hold the
Tuning Up
or
Down
button for more than 1 second.
To save a station to a preset number:
1.
Select the desired station.
2.
Press the
Memory
button on the unit or remote control.
3.
Use the
Number
buttons
(1–10/10+)
on the unit or the remote control to enter the desired
preset number.
4.
Press the
Memory
button to save the station to the preset.
To recall a saved radio station’s preset number,
use the
Number
buttons
(1–10/10+)
on the
unit or the remote control to enter the desired preset number. To recall presets higher than 10,
press the
10/10+
button on the unit followed by the additional number button to get to the
desired preset (e.g. to get to preset 12, select
10/10+
followed by
2
).
Important:
The preset memory can hold up to 20 FM stations and 20 AM stations.
If you cannot receive a good broadcast signal, we recommend installing an outdoor antenna.
For details, inquire at the retail store where you purchased the unit.
When you receive a clear broadcast signal, affix the antenna in a position with tape where the
noise level is minimal.
