Denali CANsmart KTM 1290 Instructions Manual Download Page 10

Page: 10 / 11

7. Controlling Via The Motorcycle (KTM 890)

Note:

Due to variances with the KTM 890’s factory wiring harness, the

following limitations apply:

Auxiliary Light One & Two Dimming and ON/OFF functions are not available

from bikes factory controls

(Must be set using software)

Turn signal circuit function not available.

Cancel auxiliary lights with turn signal feature not available.

Flash auxiliary lights as turn signal feature not available.

Auxiliary brake light activates with front brake lever only.

7.1 - KTM 890 CANsmart Operation

Auxiliary Horn

Sound Auxiliary Horn

Press vehicle's original horn button

Auxiliary Brake Light

Activate Auxiliary Brake Light

Apply vehicles front brakes (Can be set to flash upon deceleration)

Heated Gear

On/Off

Activate vehicles original heated grips

Adjust Heat

Change the power level of the vehicles original heated grip

Summary of Contents for CANsmart KTM 1290












Search results

Summary of Contents for CANsmart KTM 1290

Reviews:

Related manuals for CANsmart KTM 1290

Brands by name

Popular brands

Denali CANsmart KTM 1290, Instructions Manual

Search results

Summary of Contents for CANsmart KTM 1290

Reviews:

Related manuals for CANsmart KTM 1290

Brands by name

Popular brands