DENALIELECTRONICS.COM
5. Software Overview (
continued)
5.3 - Auxiliary Lights Two (Pair or Split)
Available settings include “Off when turn signal active”, Flash when turn signal active”, “Strobe when horn active”, “Strobe on flash to pass”, “Inverse flashing
when hazards active” as well as “Modulation”. “Three-Wire dimming mode” can be turned off to properly dim LED lights which do not have a dedicated 3rd
dimming wire. From the extra settings window you can adjust the “Strobe Intensity” as well as the “Modulation variation”.
5.4 - Auxiliary Brake Light
The feature-rich Auxiliary Brake Light circuit function will transform a simple 2-wire brake light into a "smart brake light" complete with running light, multiple
flash patterns, and deceleration activated braking functionality. From the extra settings window you can also adjust the “Brake Flashing Travel Speed” as well as
the “Deceleration activated braking sensitivity”.
5.5 - Auxiliary Horn
The horn circuit enables the addition of an auxiliary horn without having to add a relay and dedicated horn wiring harness.
5.6 - Accessory
The Accessory circuit function will provide simple switched 12v power to an accessory of your choice when the motorcycles ignition is turned on. Additionally a
time-out can be set from 0-60 seconds, which determines how long the accessory circuit will remain on after the motorcycles ignition is turned off. The 3rd
“data” wire always turns off instantly with ignition.
