3.2 - Horn - (Blue Circuit)
Step One:
Plug the male 2-pin connector of the Horn Extension into
blue horn circuit on the CANsmart™ Controller.
Step Two:
Begin routing the harness toward the front of the bike.
Secure the harness to the vehicle’s frame along the way with the
included zip ties. Be sure to avoid any moving components such as
radiator fan blades or suspension.
Step Three:
Plug the spade connectors of the Horn Extension into the
DENALI SoundBomb Horn. The Green wire connects to the positive (+)
terminal on the horn, the Black wire goes to the negative (-) terminal.
3.3 - Horn Input Harness
Step One:
Plug the male 1-pin connector of the Horn Input Harness into
the green with black stripe horn input wire on the CANsmart™
Controller.
Step Two:
Disconnect the horn positive wire from the factory horn.
Step Three:
Connect the Horn Input Harness to the factory horn
positive terminal.
Step Four:
Plug the horn positive wire into the piggy back terminal on
the Horn Input Harness.
3. Connecting Accessories
(continued)
DENALIELECTRONICS.COM
3.4 - Brake Light - (Yellow Circuit)
Step One:
Route the harness of the DENALI B6 Brake Light from the
rear of your motorcycle toward the CANsmart™ Controller.
Step Two:
Plug the Brake Light Pigtail into the connector on the DENALI
B6 Brake Light.
Step Three:
Plug the male 2-pin connector of the Brake Light Pigtail
into the yellow brake light circuit on the CANsmart™ Controller.
Brake Light Wiring Adapter
Horn Input
Horn Extension
Horn Input
SoundBomb™ Horn
Horn Extension
Horn Input Harness
Horn Positive
Wire
Factory Horn
Vehicle Inputs
B6 Brake Light
