4. Spare Parts List
MERMAID E500-S
STD08
Page 45 of 52
Operation & use of Trigger and rotating nozzle Type 1
Prepare for blasting
1)
Hold the trigger gun with 2 hands, 1 on the trigger and the other on the handle.
2)
With the lance assembly pointing down
3)
Slowly press on the trigger to bring up pressure with the lance assembly pointing in
the downward direction.
4)
Check that no over pressure and no leaking on the fittings.
5)
Release the trigger and make any holding position adjustment.
6)
Start blasting by follow the procedure from 2~4.
Note: Do not point the lance at any person at any time.
Ensure the rotating nozzle is pointing down before starting to
blast. This will increase the life-span of the rotating nozzle.
WARNING
