1. Getting acquainted with your High Pressure Cleaner
C-250E R14 Page 7
Operations
To prevent accidents from happening, ensure the safety of the person(s) who
uses the equipment and to protect bystanders and nearby placed inventory or
machinery, a few safety precautions needs attention.
1)
T
reat the machine as a high-speed cutting tool.
2)
A
nyone
under the age of 18 is NOT allowed to use the machine.
3)
A
lways use a proper plug and socket specially designed with ground to earth wiring.
4)
O
nly connect to an installation with earth wiring. A certified electrician shall make the
installation. It is strongly recommended that the electric supply to the machine include a
Residual Current Device/GFCI.
5)
A
lways keep the High Pressure Cleaner and its accessories in good working condition.
Check the machine for defects, especially the insulation on the electric cable. Do NOT
start up the machine if there is any defect. Have the machine serviced.
6)
W
hen using the High Pressure Cleaner and its accessories, eye protection must be worn
to protect against repelling or ricocheting matters causing eye damage.
7)
S
uitable
clothing and footwear must be worn while using the equipment to protect the
operator. Do not try to clean clothes or footwear with the machine.
8)
P
recautions must be made to keep bystanders away from the working range.
9)
D
o NOT spray-clean on yourself, others or live animals. The
high-pressure beams are capable of making severe injuries.
10)
D
o NOT spray at electrical equipment OR the machine itself.
11)
W
hile repairing or servicing the equipment and its accessories always make sure the
machine is turned off and disconnected from the main power supply.
12)
O
nly allow instructed personnel to operate the machine.
13)
A
ctivating the trigger/gun can cause backward force therefore always hold spray lance
with both hands.
14)
W
hen pausing during operation, turned off the main switch of the machine.
15)
O
nly use high-pressure hoses, connections and nozzles specified by
DEN-SIN
.
16)
IMPORTANT
– Do not use the machine in a possible explosive environment in
accordance with EN-50014.
WARNING
