1. Getting acquainted with your High Pressure Cleaner
C-250E R14 Page 5
T
he high pressure cleaner is now ready for
operation. The spray-gun lance is affected by a
recoil force during operation – therefore keep a
firm grip with both hands on the Spray-gun handle
and the lance. Press the trigger and tighten pressure
regulating knob to achieve maximum pressure for
effective cleaning.
P
ut the power-plug into a main power supply
socket. Turn on the power of the High Pressure
Cleaner by turning the knob clockwise to the ON
position.
T
he high pressure cleaner is now ready for operation. The contractor lance is affected by a
recoil force during operation – therefore keep a firm grip with both hands on the contractor
lance. Open ball valve and tighten the needle valve to achieve maximum pressure for effective
cleaning.
T
he pressure can be regulated by turning the knob on the spray-gun
lance. Tighten knob for maximum pressure and loosen for low
pressure washing. When using chemical injector, pressure must be
adjusted to low.
Make sure your local power supply specifications are in accordance with the
motors requirement. Refer to the ID-plate on the machine. Do NOT run the
High Pressure Cleaner without sufficient potable water supply as it can cause
cavitation and serious damage to internal pump parts. Do not let the machine
recycle the water (running with Spray-gun trigger not activated) for more than
a minute. This can cause serious damage to the seals.
CAUTION
Depress Trigger
Knob fully tighten
Pressure Regulating Knob
