RD20024
Page 25
WIRING OF THE TOWING VEHICLE
Connect wiring to towing vehicle, keeping in mind the color
code indicated below.
1. Make certain towing vehicle lights are
“OFF”
.
2. Connect
YELLOW wire to left turn signal and stop wire in
the left rear of towing vehicle with the wire splicer (01883)
supplied.
3. Connect
GREEN wire to the right turn signal and stop
wire.
4. Connect
BROWN wire to tail light wire.
5.
VERY IMPORTANT
- connect
WHITE wire to frame body
of towing vehicle. This is the common ground, and a clean
metal - to - metal contact must be made.
CAUTION:
Many flashers for vehicle turn signals will
not carry the additional load of Kar Kaddy turn signals.
If normal operation does not occur when connected to
the Kar Kaddy, a heavy duty replacement flasher may be
obtained through auto parts outlets.
WHITE Ground
BROWN Tail Lights, License Plate Lights,
Light Cluster Bar & Clearance Lights
YELLOW Left Turn and Stop
GREEN Right Turn and Stop
COLOR CODE FOR WIRING HARNESS
1
REF.
NO. PART NO. QTY.
DESCRIPTION
PARTS LIST
1.
11590
1 Tongue Wiring Harness
2.
15921
1 Main Frame Wiring Harness
Please order replacement parts by PART NO. and DESCRIPTION.
2
TESTING LIGHTS BEFORE USE
1. Check that the WHITE (ground) wire of the wiring harness
is connected to the Kar Kaddy frame and the
WHITE
(ground) wire is connected to the frame of the towing
vehicle.
2. With headlights in “ON” position, the tail lights, the light
cluster bar, the license plate light, and the clearance lights
should be lighted.
3. Start engine and have someone depress brake pedal.
Brake lights of tow dolly and towing vehicle should come
“on” and “off” simultaneously with each application.
4. Turn left turn signal on. Left turn light of Kar Kaddy and
towing vehicle should flash simultaneously. Should the
turn signal lights of the trailer function opposite to those
of the towing vehicle, it is probable that the
YELLOW
(Driver side) and GREEN (Passenger side) wires have
been reversed. Check the plug connection under the
tongue of the Kar Kaddy to make sure wire colors are
not crossed at that point. If plug connection is incorrect,
correct problem by reversing yellow and green wire con-
nection on the towing vehicle.
On the left side, plug in bullet plugs with white to white,
black to brown and yellow to red. On the right side, plug
white to white, black to brown and green to red.
FENDER WIRING
Wiring Diagram
