Page
8
Modus M28Z Table English Rev 1
Turning the Focus Lock
On
will turn off the autofocus facility and lock the focus at the
current setting. Turning the Focus Lock
Off
will re-enable autofocus.
InfraRed :
On / Off
Normally the system filters out Infrared light.
Turning the Infrared On allows this spectrum of light to pass through to the camera.
When the Infrared mode is turned on the image becomes black and white.
Cam WDR :
Off / WD / VE
The Wide Dynamic Range mode is a function for dividing an image into several blocks and
correcting blocked-up shadows and blown-out highlights in accordance with the intensity
difference.
It enables you to view images with large intensity differences.
WD
– Images with
Wide Dynamic Range
are re-produced by combining long- exposure
signals with high-intensity signals obtained with short exposure.
VE
– Using the
Visibility Enhancer
function will make the darker part of a camera image
brighter as well as automatically correct brightness and contrast to show parts clearly
without overexposure.
Pick the option which shows the best results in your application.
Noise R:
0
– 5
The
Noise Reduction
function removes noise to provide clearer images.
Screen Size:
7
– 100
Enter the size of your display in inches (Measured Diagonally). This size is used to
calculate the magnification levels.
Lense Diopter :
1
– 15
Enter the Lense Diopter number of the lense used.
Show OSD :
On / Off
Turning the OSD Screen Display ( OSD ) off removes all the static messages from the
screen.
Time :
xx:xx
Enter the current time starting with minutes and then hours.
Note:- Time and Date are only used to Date Stamp the captured images.
