Page
10
Modus M28Z Table English Rev 1
Troubleshooting
Changing the Output Frame Rate
Most monitors and HD televisions can display the many different standards of HD signals,
however some cannot. If your monitor/TV does not display the image from the Modus M28Z you
should try the following: Power-off the Modus M28Z, press and hold the Overview button and
power on the unit. This will change the unit from 50 Hz mode to 60 Hz or vice versa. You will hear
a sequence of beeps confirming the frequency change.
Taking Care of your Modus M28Z
Do not touch the lens. Dirt on the lens will appear as a blurred or dim image or as fuzzy spots on
the screen. If you believe the lens is dirty, it can be cleaned with a
soft
, dry cloth applying minimal
pressure. As the lens is polished and coated, do
not
use a wet or coarse cloth; avoid detergents
and abrasive substances or solvents to clean it.
WARNING: Never look directly at the LED light source for any prolonged period of time.
If the hinges loosen with use they can be tightened with the Allen key provided. To do this, insert
the Allen key into the screw head. Turn each screw clockwise about a quarter turn. Do not over-
tighten.
Use only the supplied
power supply and inspect the cabling
regularly for damage.
