Page
6
Modus M28Z Table English Rev 1
When you have an image you want to capture, simply press the capture button.
The system will indicate the image is being saved to the drive and when done.
The image is saved as a 1920 x 1080 bitmap ( BMP ) format.
The image name is Date and Time stamped and saved in this format
“IMG-DateTime.bmp”
Remove the USB Key and use a PC to view the saved images.
NB:
The USB Key must be in FAT File System Format. It will not work with any other format.
Magnification
Press the Zoom-Up button to enlarge the image and Zoom-Down to reduce the image size. The
unit will make a sound to indicate when it has reached maximum or minimum zoom limits.
Magnification level OSD
The current magnification level is displayed for example “x30“ to show a magnification level of 30.
When the magnification changes from optical to digital zoom a ‘d’ is also displayed “x60d” to
indicate a magnification level of 60 and in digital zoom..
Overview
Overview allows you to easily locate a point of interest on the object you are viewing. Press and
release the Overview button to make the camera zoom out fully and revert to full-colour mode. A
cross is displayed in the centre of the screen as an aid to location. Place the point of interest
under the cross and press any key to restore the magnification to the previous level.
Brightness
The image brightness can be adjusted to suit your preference. Brightness adjustment is available
by pressing and holding the
Capture
button (you should hear a beep). Next use the
Zoom Up
and
Zoom Down
buttons to adjust the image brightness as desired. Press the
Capture button
again
to save the setting and exit edit mode. The setting you choose will be saved and used
subsequently for that mode of operation.
Factory defaults
Press
Capture
while powering-on the Modus M28Z to restore factory settings for sound, lighting,
brightness settings and video frame rate.
The factory default settings are lights on, sound on and the frame rate that was set for your
country before shipping.
