Page
5
Modus M28Z Table English Rev 1
+4 Lens requires a distance of around 250mm between lens and table.
+5 Lens requires a distance of around 200mm between lens and table.
Light Adjustment
The light can be rotated as shown. It should be adjusted so that it shines on an area centred
about the camera’s image.
Foot Switch
A footswitch is available for the Modus M28Z Table. This allows control of the zoom functions.
The left pedal will zoom in and the right will zoom out. This is useful for hands free operation of
the zoom function.
To use the footswitch simply plug the jack into the footswitch socket at the bottom rear of the unit.
See diagram on previous page for location of foot switch socket.
Controls
Power
Push the power button to turn the unit on. A blue image will appear on your screen and after a few
seconds the picture from the camera will appear.
If not, use your monitor’s remote control or
control panel to switch to the appropriate input used for the Modus M28Z. Pushing the Power
button again will power off the Modus M28Z.
Capture
To use this feature, insert a USB Key into the USB port.
When the system has detected the k
ey it will report “USB Key Ready”
