25
GB
unsuitable grinding tools, grinding with a
coolant solution, grinding or cutting haz-
ardous materials such as asbestos).
The device is intended to be used by
do-it-yourselfers. It was not designed for
heavy commercial use. The tool is to be
used by adults. Children over the age of
16 may not use the tool except under su-
pervision.
The manufacturer is not liable for damag-
es caused by an improper use or incorrect
operation of this device.
General description
The illustration how to handle
the appliance can be found on
pages 2 and 3.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
- Device
- Handgrip
- Protective hood
- Chuck key
- Carbon brushes
- Instructions for use
Description of function
The angle grinder is made for cutting,
scrubbing or brushing metal. There is a
special disc for each of the separate ap-
plications. Please refer to the information
from the disc manufacturer.
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Spindle stop button
2 Threads for handgrip
3 Speed regulator
4 On/Off switch with switch lock
(4a)
4b Release
5 Screw
6 Service panel
7 Protective hood
8 Handle
9 Cutting disc (not included in de-
livery)
10 Mains plug
11 Spare carbon brushes
12 Chuck key
13 Clamping lever
13a Adjustment nut
14 Mounting flange
15 Clamping flange
16 Uptake spindle
17 Pressure spring
18 Carbon brush
19 Groove for pressure spring
20 Connector
21 Contact shoe
22 Contact plug
Technical data
Angle grinder ................... DP-EAG 1225
Rated input voltage..... 220-240 V~, 50 Hz
Power input ..................................1200 W
Idling speed (n) .................... 0-11000 min
-1
Dimensions of the cutting/
roughing discs .............Ø 125 x 22,23 mm
Thickness of the cutting/
roughing discs .........................max. 6 mm
Grinding spindle thread .................... .M14
Thread length
of the grinding spindle ...........max. 12 mm
Safety class ........................................ II
Protection category............................IPX0
Sound pressure level
(L
pA
) .....................87,9 dB(A); K
pA
= 3 dB
