Deltafox DG-CCS 1820 T Set, Translation Of The Original Instructions For Use, Page: 77 / 180

77
GB
Trouble shooting
Problem Possilble cause Fault correction
Appliance won‘t
start
Battery ( 15) discharged
Recharge battery (observe
the separate operating ins-
tructions for the battery and
charger)
Battery ( 15) not inserted
Insert battery (observe the
separate operating inst-
ructions for the battery and
charger)
Safety lock ( 17) not pressed
properly
Turn on
On/Off switch ( 18) defective
Send in to Service Centre for
repair
Device runs with in-
terruptions
Internal loose electrical connec-
tion
Repair by Service Centre
On/Off switch ( 18) defective
Inferior cutting per-
formance
Incorrectly mounted saw chain Mount saw chain correctly
Saw chain blunt
Sharpen cutting teeth or place
on new chain
Chain tension insufficient Check chain tension
Saw runs with dif-
ficulty, chain comes
off
Chain tension insufficient Check chain tension
Chain becomes hot,
smoke development
during sawing, dis-
coloration of the rail
Too little chain oil
Check oil level and, where ap-
propriate, refill with chain oil,
check oil automatic system
and, where appropriate, clean
oil outflow ( 28) duct or
have repaired by customer
service