Deltafox DG-CCS 1820 T Set, Translation Of The Original Instructions For Use

Page: 73 / 180

73
GB
Maintenance / Cleaning
Ask our service centre to carry out
any work that is not described in
these instructions. Use only origi-
nal parts.
Turn off the appliance and, before
doing any servicing, remove the
battery.
Use cut-protection gloves when
handling the chain or the chain bar.
Risk of cuts!
Cleaning
Do not use cleaning agents or sol-
vents. You may otherwise irrepara-
bly damage the appliance.
Table of maintenance intervals
Machine Part Action
Before
each use
After 10 ope-
rating hours
Komplette Maschine Check condition, replace damaged
parts if necessary

Accessible screws
and nuts
Tighten

Chain wheel Check, replace if necessary

Saw chain
Check, oil, sharpen or replace if
necessary

Blade Check, turn, clean, oil
 
• Keep clean the ventilation slots
( 20), motor housing ( 20) and
handles of the appliance. Use a damp
cloth or a brush.
• Only dry wipe the saw chain. After
cleaning, lightly oil the saw chain with
chain oil. Apply individual drops of oil
to the joints and the points of the teeth
on the individual chain links.
Maintenance intervals
Carry out the maintenance work listed
in the table below at regular intervals.
Regular maintenance of your equipment
extends the lifespan of the equipment.
You will also achieve optimum cutting per-
formances and avoid accidents.