Delta Vivotek ND9213P User Manual Download Page 19

Page: 19 / 171

VIVOTEK - Built with Reliability

User's Manual - 19

Interface Connections

1. Connect to a monitor using an HDMI cable. VGA is also supported.

2. Connect CAT5e or better-quality Ethernet cable to the GbE Ethernet port.

3. Connect USB devices such as, mouse, keyboard, USB optical drive, or USB thumb drive (for

matted in FAT format), joystick, or UPS.

4. Connect external devices, such as sensors, relays, or alarms to the terminal block.

5. Connect the system to the power adapter and to the power mains.

Camera 01

Camera 02

Camera 03

Camera 04

Camera 06

Camera 05

Camera 07

Camera 08

Camera 09

LAN/WAN

USB 3.0 & 2.0

AC 110-240V,

96W

USB 3.0

If you connect external USB storage, connect it to the USB 3.0 port (the upper port).

NOTE:

Summary of Contents for Vivotek ND9213P












































































































































































Search results

Summary of Contents for Vivotek ND9213P

Reviews:

Related manuals for Vivotek ND9213P

Brands by name

Popular brands

Delta Vivotek ND9213P, User Manual

Search results

Summary of Contents for Vivotek ND9213P

Reviews:

Related manuals for Vivotek ND9213P

Brands by name

Popular brands