NovoDisplay User Manual
Copyright © 2019 Vivitek. Vivitek is a trademark of Delta Electronics, Inc.
27
3. Use an impact drill to drill the holes in the marked position with a suggested depth of
over 85mm.
4. Mount the (A) horizontal beam bracket onto the wall by placing the bracket against a
proper wall and securing it using the eight (C) M8x80mm screws.
NOTE: You can choose the screw clearance depending on the conditions of the wall.
5. Mount the display (with the vertical beam brackets attached) onto the horizontal
beam bracket on the wall so that the hooks on the upper part of the vertical beam
brackets fit into the top section of the horizontal beam bracket.
