manualshive.com logo in svg

Delta SOLIVIA 2.5 AP G3 TR, Operation And Installation Manual, Page: 33 / 48

Share
Download
Delta SOLIVIA 2.5 AP G3 TR Operation And Installation Manual Download Page 33

EN

31

Operation and installation manual SOLIVIA 2.5 AP G3 TR

8.3.7.3  Submenu S: Firmware

More detailed information on the firmware menu within the submenu S (Setup).

Submenu Setup

Firmware

S -> Firmware

AC-Ctrl maj.min.bug

Down

Down

Down

Up

Up

Up

Down to 4

3

Up to 3

4

ESC

ESC

ESC

ESC

ENTER

S -> Firmware 

DC-Ctrl maj.min.bug

S -> Firmware 

SC-Ctrl maj.min.bug

S -> Firmware 

Display-Ctrl maj.min.bug

9. 

Diagnostics and data evaluation

9.1 

Malfunction rectification

The solar inverter is provided with an automatic diagnostics system which indepen-

dently identifies certain faults and which can make them visible on the display.
Troubleshooting in the field
In principle, it is always worth attempting a reset by reinitializing the solar inverter 

whenever an error message appears on the display.
To reset the device, proceed as follows:
1.  Isolate the solar inverter from the grid (open automatic circuit breaker).
2.  Switch off the DC disconnector.
3.  Wait: approx. 1 minute.
4.  Switch DC disconnector back on.
5.  Switch in grid (close automatic circuit breaker).

Summary of Contents for SOLIVIA 2.5 AP G3 TR

















































Reviews:

No comments