manualshive.com logo in svg

Delta SOLIVIA 2.5 AP G3 TR, Operation And Installation Manual, Page: 11 / 48

Share
Download
Delta SOLIVIA 2.5 AP G3 TR Operation And Installation Manual Download Page 11

EN

9

Operation and installation manual SOLIVIA 2.5 AP G3 TR

between the grid, PV modules and accessible interfaces (display, RS485 interface). 

Relevant standards concerning electromagnetic compatibility (EMC) and safety are 

fulfilled.
The solar inverter is functional in on-grid operation exclusively. An automated isolation 

point, which is approved by a certification agency, guarantees secure disconnection in 

case of circuit isolation or interruptions in power supply and avoids isolated operation.
The disconnection equipment allows for automatic isolation for in-plant generation sys-

tems of nominal power ≤ 4.6 kVA, with single-phase parallel feed-in through the solar 

inverter into the grid.

5.3 

Equipment overview

1.  Connections for PV modules
2.  Grid connection
3.  Interface connection RS485 (EIA485)
4.  Display for status messages and keypad for operation
5.  Light-emitting diodes for operational status display

(3)

(2)

(1)

(4)

(5)

Summary of Contents for SOLIVIA 2.5 AP G3 TR

















































Reviews:

No comments