1
2
3
5
4
Do not tighten bolts
until rack is fully assembled
and tubes are properly aligned.
Adjust position of arms before
placing bike on stand.
Tighten all bolts
before using.
IMPORTANT / SAFETY
In order to avoid accidental toppling of the rack, a wall stabilizing strap is
supplied. This should be attached to the rack at one end with the bolt
provided. The other end of the strap should be secured to the wall using a
screw that is suitable for the type of wall construction. If in doubt, consult
your hardware merchant for the correct method of fixing based on the wall
construction.
Delta Cycle Corporation 36 York Avenue, Randolph, MA 02368 USA / 800-474-6615 / www.designbydelta.com
Need help?
Email us at [email protected]
& we’ll help solve your issue.
Assembly video
Visit designbydelta.com/downloads
