32
Enable Emergency Dump
When the instrument is in endless loop memory and you start dumping data, only data logged in
the last session will be dumped. In particular cases (if, i.e., the previous data had been uninten-
tionally deleted or spoiled) it might be necessary to dump the memory whole content. In this
case the emergency dump has to be enabled, paying attention, because the operation might over-
run other data already present on the PC, which will consequently go lost.
Calibration
It starts the calibration procedure of the relative humidity probe in HD206-2 and HD226-2 mod-
els. This item is disabled if the program setup lock has been entered, by means of the Lock Pro-
gram command.
G) ? Menu (Help)
DeltaLog2 Info
About software version
DeltaLog2 Licence
Software licence agreement with the end user.
DeltaLog2 Handbook (User’s Manual)
DeltaLog2 software user’s manual.
2. Toolbar
In order to speed-up the use of the system, some operations accessible from menu are available also
from toolbar placed immediately under the main menu (series of buttons).
File/Open
It opens a file of data previously saved.
