23/32
2016/01 - Indice de révision : D - Code : 35101
The stands are fitted with 3 height adjustable feet (loosen and tighten with an Allen key), in order to follow
the contour of the top of the coping.
2) Wiring in the cover motor (EC)
Run an electrical cable with three 2.5 mm2 wires
(neutral - live - earth) up to the cable port in the
stand housing the motor.
Depending on the final position of the motor stand,
draw about 60 cm of cable through the port.
CAUTION, SAFETY:
The cable should not present a trip hazard to
people in the area of pool. We highly recommend
that the cable be run under the deck (under paving
slabs, in a trench, in a joint between slab, etc.) and
in a sheath to protect the cable and allow it to be
replaced if necessary.
A 30mA differential circuit breaker and a means of
disconnecting the power supply should be installed
at the head of the line (adifferential circuit breaker
could be used for both).
