27/32
2016/01 - Indice de révision : D - Code : 35101
5) Installing the casing
Holding the casing in both hands, position it over the
top of the stand. Make sure that electrical cables will
not be caught between the flange and the casing.
Swing the casing down into position.
Use the self tapping screws 4.2x13 to fix the casing
to the flange.
V. PROGRAMMING THE ENDS OF TRAVEL (VERSION EC WITH ENDS OF TRAVEL)
Remove the casing from the motor stand to access
the ends of travel programming panel.
Whether its a first installation or a modification of
the ends of travel, begin with an initialisation:
Hold the two keys
in for 5 seconds, all 5
LEDs begin to flash.
Press OK for 1 second.
The first two LEDs light up.
On the control panel, all the LEDs
are out.
