Delta Dual V4/V6
11.0 Installation of Chamber - Section E
Installing pumps and high level alarm in chamber
Pump out water from chamber.
31
Manually remove any debris from chamber and
residual water using a wet vac.
32
Remove discharge arms from 'Y' piece manifold and
screw 'Y' piece on to gatevalve. Ensure gatevalve is
fully open.
33
Wrap PTFE tape around thread located on male irons
at the bottom of the discharge arms and screw
discharge arms on to pumps.
34
For technical support, please call 01279 757400
19
