Delta DPH-600K, User Manual

Page: 30 / 232

3 - 4
Modulon DPH Series
3.1.4 Manual Bypass Mode_ Single Input_ Single Unit
WARNING:
1. In Manual Bypass mode, make sure that all of the breakers (except the Manual
Bypass Switch (Q3)) are in the OFF position before working on the UPS’s
internal circuits. This avoids electric shock.
$IWHUWKHSRZHULQVLGHWKH836LVFRPSOHWHO\FXWRႇWKHUHLVQRKLJKYROWDJH
inside the UPS and maintenance can be performed safely. However, to avoid
electric shock, please do not touch the following parts: AC Input terminal block,
Bypass Input terminal block, UPS Output terminal block, Battery Input terminal
block, grounding terminals (see
)LJXUH
~
)LJXUH
for the location of
these terminal blocks and terminals) and any copper bars connected to the
Manual Bypass Switch (Q3), as they may carry high voltage.
'XULQJ0DQXDO%\SDVVPRGHWKH836¶VLQSXWSRZHULVFRPSOHWHO\FXWRႇDQG
the connected critical loads are not protected.
When the UPS needs maintenance, you can manually switch the UPS to Manual Bypass
mode. To let the UPS run in Manual Bypass mode, please follow the procedures below:
1
&RQ¿UPWKDWWKHE\SDVV$&VRXUFHDQGWKH676PRGXOHDUHQRUPDO
2
Tap the LCD’s ON/ OFF Button ( ) and the ' POWER OFF? ' screen will pop up to
DVNLI\RXZDQWWRSRZHURႇWKH836¶VLQYHUWHU3OHDVHVHOHFW
' YES '.
3
Turn ON the Manual Bypass Switch (Q3).
4
Turn OFF the Bypass Switch (Q2).
5
Turn OFF the Input Switch (Q1) and Output Switch (Q4).
6
Turn OFF each external battery cabinet’s breaker (Q5).
,Q0DQXDO%\SDVVPRGHDOOSRZHULQVLGHWKH836LVFRPSOHWHO\FXWRႇDQGPDLQWHQDQFH
personnel can perform maintenance safely. Please see
)LJXUH
for Manual Bypass
PRGHGLDJUDP'XULQJ0DQXDO%\SDVVPRGHWKH836¶VWULFRORU/('DQG/&'DUHERWKRႇ