Delta AC MAX, Installation And Operation Manual

Page: 22 / 34

v1.0.1
22
3.3 Configuration
Operating without OCPP system
User can configure the below information for EVSE:
Item Description
Authentication Choose the authorized mode for user authentication. Default will be “RFID
mode”.
Maximum charging time Choose the maximum charging time for each charging session. Default will
be “No limit”.
Maximum charging current Choose the maximum charging current per phase. It is limited by the dip
switch setting.
System time Choose the system time “YYYY/MM/DD- HH:MM:SS”
WiFi AP mode When active, EVSE is capable of commissioning through WiFi connection.
Operating with OCPP system
User can configure the below information for EVSE:
Item Description
Charge Box ID The Box ID shall be consistent with the one in your OCPP system.
Server URL Enter the URL to connect to your OCPP system
OCPP version Choose OCPP version. Default will be “OCPP 1.6J”.
Offline policy Choose the behavior when disconnection. Default will be “Local
authentication”.
Maximum charging current Choose the maximum charging current per phase. It is limited by the dip
switch setting.
System time Choose the system time “YYYY/MM/DD- HH:MM:SS”
WiFi AP mode When active, EVSE is capable of commissioning through WiFi connection.