background image

PMAC PCI-Lite Hardware Reference Manual 

Table of Contents  

iii

 

E122: XIN Feature Selection ..................................................................................................................................41

 

MATING CONNECTORS .......................................................................................................................................43

 

Base Board Connectors ...........................................................................................................................................43

 

J1 (JDISP)/Display.............................................................................................................................................43

 

J2 (JPAN)/Control Panel....................................................................................................................................43

 

J3 (JTHW)/Multiplexer Port...............................................................................................................................43

 

J4 (JRS422)/RS232 OR 422/Serial Communications .........................................................................................43

 

J5 (JOPT)/OPTO I/O..........................................................................................................................................43

 

J6 (JXIO)/Expansion Board................................................................................................................................43

 

J8 (JMACH)/Machine Connector .......................................................................................................................43

 

JS1/A-D Inputs 1-4 .............................................................................................................................................43

 

JEQU/Position Compare ....................................................................................................................................43

 

JANA/Analog Inputs Option ...............................................................................................................................44

 

CONNECTOR PINOUTS.........................................................................................................................................45

 

J1: Display Port Connector......................................................................................................................................45

 

J2: Control Panel Port Connector............................................................................................................................46

 

J3: Multiplexer Port Connector ...............................................................................................................................47

 

J4: Serial Port Connector.........................................................................................................................................48

 

J5: I/O Port Connector.............................................................................................................................................49

 

J6: Auxiliary I/O Port Connector ............................................................................................................................50

 

J8: Machine Port Connector ....................................................................................................................................51

 

J8: Machine Port Connector ....................................................................................................................................52

 

J9 (JEQU): Position-Compare Connector ...............................................................................................................53

 

J30 (JANA) Analog Input Port Connector (Optional).............................................................................................53

 

J31 (JUSB) Universal Serial Bus Port (Optional) ...................................................................................................54

 

JS1: A/D Port 1 Connector......................................................................................................................................54

 

TB1 (JPWR) External Power Supply Connection...................................................................................................54

 

 

 

 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PMAC Lite

































































Reviews: