Delta Tau Geo MACRO, User Manual And Reference Manual

Page: 178 / 205

Geo MACRO Drive User Manual
166 Appendix A
APPENDIX A
Fiber Optic Cable Ordering Information
CABFBR-1 20 cm terminated glass optical fiber cable 3A3-A042P2-OPT
CABFBR-
2 1.5m (5ft) terminated glass optical fiber cable 3A3-0042P2-OPT
CABFBR-
3
5m (15ft) terminated glass optical fiber cable 3B3-0042P2-OPT
CABFBR-
4
8m (28ft) terminated glass optical fiber cable 3C3-0042P2-OPT
CABFBR-
5 Custom length terminated glass optical fiber cable (per meter) 3D3-0042P2-OPT
Mating Connector and Cable Kits
Geo Drives do not come with any connectors for the AC input, 24VDC input, Regen Resistor Output, or
Motor Outputs. The user should purchase the appropriate Mating Connector and Cable Kits from Delta
Tau Data Systems, Inc., or they can obtain the connectors and pins from other sources.
Cable sets can be purchased directly from Delta Tau to make the wiring of the system easier. Available
cable kits (CABKITxx) are listed below.
For those manufacturing their own cable sets, the table below provides Connector Kits to use with each
drive. Connector Kits (CONKITxx) include the MOLEX connectors and pins for the AC input, 24VDC
power supply and the motor outputs.
Note:
Due to the variety and wide availability of D-type connectors and back shells for
the encoders, CABKITs and CONKITs do not provide these parts.
For correct installation of the connector kit to the Cables, proper crimping tools are
required. Check the Molex website to find the correct tool for the appropriate pin.
Cable kits have terminated cables on the drive end and flying leads on the other.
Mating Connector and Cable Kits
Connector Kit Description
CONKIT1A Mating Connector Kit for dual axis drives up to 5-amp continuous rating
(Gxx012xx, Gxx032xx, Gxx052xx, GxL102xx): Includes Molex Connectors
kits for two motors, AC input connection, and 24V power connection.
Requires Molex Crimp tools for proper installation.
CABKIT1B Includes Molex mating connectors pre-crimped for dual axis drives up to 5-
amp continuous rated (Gxx012xx, Gxx032xx, Gxx052xx,GxL102).
•
3 ft. AC Input Cable
•
3 ft. 24VDC Power Cable
•
10 ft. shielded Motor Cables
CONKIT1C Mating Connector Kit for single axis drives up to 5-amp continuous rating
(Gxx051xx): Includes Molex Connectors kits for two motors, AC input
connection, and 24V power connection.
Requires Molex Crimp tools for proper installation.