ACC-72EX User Manual
Software setup
80
The Hilscher slave module (COMX_RE_IES) above was dragged and dropped from the fieldbus protocol
list. Third party slave modules can be added to that list by going to “Import Device Descriptions…” in
the Network tab:
See Appendix C for an example setup using an ACC-72EX Ethernet IP slave with a third party Ethernet
IP master PLC controller.
ACC-72EX Setup Assistant
The next step is to generate the memory map and suggested M-Variables for the Hilscher module. Run
the ACC-72EX Setup Assistant. In the Memory Map Generator groupbox, click the Connect to PMAC
button, and select the UMAC where the ACC-72EX is installed. Once connected, the software will detect
any available ACC-72EX(s) in the rack and list it based upon the base address(es).
