MACRO-CPU Hardware Reference
Connector Summary
J1:
☼
JEXP_A: for interboard connection
J2:
☼
JEXP_B: for interboard connection
J3:
☼
JEXP_C: for interboard connection
J4:
☼
JISP: Factory configuration header
J5:
☼
JTAG/OnCE: Factory troubleshoot header
J6:
JTHW: Multiplexer Port Connector
J7:
JRS232: Serial Port Connector
J14, J17:
RJ45: MACRO Copper I/O (OPT C)
P1:
JEXP: Backplane Expansion Port Connector
TB1:
JPWR: 4-Pin Terminal Block
U73:
MACRO Fiber Optic Connector (OPT A)
☼
These co
nnectors are not typically designated as end-user interfaces. The pinouts are not included in this hardware
reference manual. Consult the factory if pinout information is needed.
3U MACRO-CPU Jumper and Switch Configurations
16
Summary of Contents for 3A0-602804-10x
