Create GP2 Program
⚫
23
2: Sensor type Settings
This explains the Measurement and Parameter settings supplied
in the WET150 sensor types in the DeltaLINK sensor library.
1.
Sensor type
: This is the name of the default WET150 Sensor
type as loaded from in the GP2 sensor library.
2.
Change the
Measurement name
to anything useful e.g Theta
(100mm) or Treatment A.
If you have more than one WET150, give each measurement a
unique name here
– e.g. “ECp at 100mm”.
This information will be displayed at the top of the column of
measurements in the results table.
If you change a Measurement name then ensure it is updated in
the Recording Rate. (The program will object and fail
to “Apply” if
you don’t do this).
Also if changing the WET150 Theta or SoilTemp Measurement
names you will need to use the same names used in the ECp
Calculation section.
Example: change the
Measurement name
to add useful
metadata e.g.
Theta
becomes
Theta Z
to display the address in
the results. The ECp calculation needs to use the Permittivity and
SoilTemp readings. So, in the Calculation section of the ECp
Measurement parameters, change the Permittivity name from
Theta
to
Theta Z
and likewise for the Temperature name, if you
have also changed that, e.g. from
SoilTemp
to
SoilTemp Z.
Showing the
addition of
address Z to
the WET150
Measurement
names
