Delta OHM HD35AP series, Operating Manual

Page: 75 / 146

HD35
- 75 -
V1.12
If the device is connected, by pressing for 5 seconds the connection button the buzzer emits a
beep, the red RF LED blinks for 1 second and the device is disconnected.
In data loggers with LCD display, the connection status is signaled also by the connection icon
on the display (see figure 3.6 on page 10):
•
the icon is steady on if the data logger is connected;
•
the icon blinks if the data logger is trying to connect (the icon will be steady on after
connection or will go on blinking if the base unit cannot be reached or the data logger
doesn’t belong to a wireless network);
•
the icon is off if the data logger is not connected.
PING function:
In the devices connected to a wireless network it is possible to check if the base unit can be
reached by briefly pressing the connection button: if the green RF LED is blinking, it means
that the base unit is reachable, otherwise it will be the red RF LED to blink.
9.4 D
ATA LOGGER WITH
LCD
OPTION
Through HD35AP-S software, you can select the measurement to be displayed on the main line
of the display or set the automatic alternation of measured quantities. Information on the con-
nection status, logging (in progress/disabled), and battery charge level are shown. The sec-
ondary line displays temperature (if measured by the model).
Fig. 9.4.1: custom LCD
Battery
level
Main line
Logging
status
Connection
status
Secondary line
RF interference
indicator
Measurement
unit