HD35
- 48 -
V1.12
10) Clock
1)
Clock Configuration: date/time of data logger. Read-only parameter if the in-
strument is connected to a base unit.
2)
Exit: returns to the main menu.
11) Password
1)
Reset password level: exits menu disabling immediately the password (the
password will not remain active for some minutes like it usually happens when exit-
ing a menu: you will have to re-enter the password even if you access the menu at
once).
2)
User password config.: sets the user level password.
3)
Exit: returns to the main menu.
12) CO
2
auto calibration – Only available in models with integrated CO
2
sensor
1)
Start/stop auto-calib.: enables or disables CO
2
auto-calibration.
2)
Auto-calib. period: time interval between two consecutive auto-calibrations.
3)
Auto-cal. 1st period: time interval after which the first auto-calibration will be
performed after activation.
4)
Background CO
2
value: CO
2
reference value for auto-calibration.
5)
Auto-cal. max change: maximum offset that can be applied to the measurement
by the auto-calibration procedure.
6)
Exit: returns to the main menu.
13) Calibration – Only available with administrator password
1)
CO 0 ppm calibration
2)
RH 75% calibration
3)
RH 33% calibration
4)
CO sensitivity calib.: sets the sensitivity of the CO sensor, when the sensor is re-
placed.
5)
CO
2
calibration
6)
Calibration Type: choice between user calibration and factory calibration.
7)
Exit: returns to the main menu.
Note: according to the data logger model, some items could not be available if not signif-
icant for that particular model.
14) Language
1)
Language config.: choice of the language to be used for the display.
2)
Exit: returns to the main menu.
15) Exit
Returns to the measurement mode.
Summary of Contents for HD35AP series
Page 120: ...HD35 120 V1 12 HD35EDLM TC...
Page 141: ...NOTES...
Page 142: ...NOTES...
Page 143: ...NOTES...
