Delta OHM HD32.3, Operating Manual

Page: 35 / 74

HD32.3
- 35 -
V1.4
Log time (Set time for the memorization)
It represents the duration of the memorization: after the set time, the memorization stops. The
memorization can be finished before the expiration of the set time, pressing
MEM key.
To disable the function, set the time at 0:00:00. In this case, the memorization stops pressing MEM
key or when the memory is full.
WBGT Index
2008/11/10 08:00:00
LOG TIME
as h:mm:ss (1h max)
arrows to correct
or <ESC> now set at:
00:00:00
With the arrows modify the set time, the maximum value admitted is 1 hour.
Confirm with
ENTER key.
Press ESC to exit from this menu level without modifying anything.
Press MENU to exit immediately from the main menu.
5.3 SERIAL MENU (
SERIAL COMMUNICATION
)
Serial sub menu allows setting the data transfer speed by serial means ( Baud rate ) and the record
printing interval ( Print Interval ).
LOG sections can be downloaded to a PC by RS232 serial connection or USB connection.
In case of serial connection, the transmission speed is set by the user (see the following paragraphs)
and, however, can’t be more than 38400 bps.
In case of USB connection, the transmission speed is fixed at 460800 bps.
After downloading the data on your PC, by the relative software, the data are elaborated by the
software for the graphical visualization and for the calculation of the comfort/stress indexes.
The instrument can be directly connected to
HD40.1 printer.
To enter into Serial submenu, go on as indicated below:
1. Press MENU key of the instrument;
2. Select, using ▼▲ arrow keys, Serial heading;
3. press ENTER;
4. Serial submenu will be visualized.
WBGT Index
2008/11/10 08:00:00
SERIAL COM MENU
Baudrate
Print Interval
<UP> <DOWN> select
<ENTER> confirm
<ESC> exit/cancel