Delta OHM HD32.3, Operating Manual

Page: 36 / 74

HD32.3
- 36 -
V1.4
5.3.1 Baud Rate
Baud Rate represents the speed used for the serial communication with the PC.
To set Baud rate , go on as indicated below:
1. select the heading with ▼▲ arrow keys;
2. press ENTER : the following message will be visualized:
WBGT Index
2008/11/10 08:00:00
set Baudrate
arrows to correct
Or <ESC> now set at:
38.400
3.
set the value through ▼▲ arrow keys;
4. press ENTER to confirm and go back to the previous screen or press ESC not to modify the
value and exit for the menu heading;
5. press ESC over and over to exit from the menu different levels;
6. press MENU to exit immediately from the main menu.
WARNING
The communication between the instrument and the PC (or serial port printer) works only if
the instrument and PC Baud rates are the same
. If USB connection is used, this parameter value
is automatically set.
NOTE: When setting the baud-rate, check the printer speed capacity.
5.3.2 Print Interval
To set Print Interval , go on as indicated below:
1. use ▲▼ arrow keys to select the heading;
2. press ENTER : the following message will be visualized;
WBGT Index
2008/11/10 08:00:00
SERIAL COM MENU
input PRINT interval
as h:mm:ss (1h max)
arrows to correct
or <ESC> now set at:
0:00:00
3. using ▼▲ arrow keys, set the value;
4. press ENTER to confirm and go back to the previous screen or press ESC not to modify the
value and exit from the menu heading;
5. press ESC over and over to exit from menu different levels;