background image

-      - 

16 

 

GUARANTEE 

 

 

 

GUARANTEE CONDITIONS   

All  DELTA  OHM  instruments  have  been  subjected  to  strict  tests  and  are  guaranteed  for  24  months  from 
date of purchase. DELTA OHM will repair or replace free of charge any parts which it considers to be inef-
ficient within the guarantee period. Complete replacement is excluded and no request of damages are rec-
ognized. The guarantee does not include accidental breakages due to transport, neglect, incorrect use, in-
correct connection to voltage different from the contemplated for the instrument. Furthermore the guaran-
tee  is not valid  if the  instrument has been repaired or tampered by unauthorized third parties. The instru-
ment  has  to  be  sent  to  the  retailer  without  transport  charge.  For  all  disputes  the  competent  court  is  the 
Court of Padua.  

 

The  electric  and  electronic  devices  with  the  following  symbol  cannot  be  disposed  in  the  public 
dumps. According to the Directive UE 2002/96/EC, the European users of electric and electronic 
devices are allowed to give back to the Distributor or Manufacturer the used device at the time of 
purchasing a  new one. The illegal disposing of electric and  electronic devices is punished  by  a 
pecuniary administrative penalty. 

This guarantee must be sent together with the instrument to our service centre.  

N.B.: Guarantee is valid only if coupon has been correctly filled in all details. 

Instrument type  

 

HD 2020 

Serial number

 

 

 

RENEWALS 

 

 

 

 

 

Date 

 

Date 

Inspector 

 

Inspector 

Date 

 

Date 

Inspector 

 

Inspector 

Date 

 

Date 

Inspector 

 

Inspector 

 

C E   C O N F O R M I T Y  

Safety 

EN61010-1  

Electromagnetic compatibility. Immunity general standard 

EN61000-6-2:2005 

Electromagnetic compatibility. Emission general standard 

EN61000-6-3:2007 

Electrostatic Discharge Immunity 

EN61000-4-2 level 3 

Susceptibility to electromagnetic interference 

EN61000-4-3 level 3 

Immunity to electrical fast transients 

EN61000-4-4 level 3 

Immunity to conducted disturbances 

EN61000-4-6 

Electromagnetic Interference - Conducted Emissions 

EN55022:2007 class B 

Electromagnetic Interference - Irradiated Emissions  

IEC/CISPR 22 class B 

 

 

 

Summary of Contents for HD 2020

















Reviews: