- -
38
HOW
TO
CONNECT
DO2003
TO
A
PC
RUNNING
WINDOWS
OPERATING
SYSTEM
The present chapter shows in details how to transfer data from DO2003 to a PC running Windows
operating system, using HyperTerminal program; how to connect the instrument to the laptop (PC)
and how to set parameters for transmission on your PC and on DO2003.
The following instructions are for those who do NOT wish to USE DeltaLog3 software.
H
ARDWARE CONNECTION
1.
The instrument must be switched off.
2.
Connect the instrument RS232C serial port, to the free serial port (COM1/COM2 port) on your
PC through 9CPRS232 Delta Ohm serial cable.
3.
Switch the instrument on and set the baud rate to 38400 (PROG key >> PRINT key >> set the
baud rate by clicking the arrows >> press ENTER to confirm).
S
OFTWARE CONNECTION TO
WINDOWS
95,
98,
NT,
ME,
2000
AND
X
P
A) After starting WINDOWS select START >> PROGRAMS >> ACCESSORIES >>
HyperTerminal.
Run HYPERTRM.EXE (double click).
Summary of Contents for DO2003
Page 2: ...2 HVACR Datalogger DO2003...
Page 20: ...20 MIN 350 MAX 1020 120 AP471 S4...
Page 58: ...58...