- -
8
As long as the logging function is active, the indications
B
and
L
flash on the display or only
L
if
the instrument is using an external power supply.
To conclude the logging operation, it is sufficient to press the StopLog <F2> key.
If after having pressed the key <2/LOG>, you do not want to proceed with the logging operation it
is sufficient to press the <ESC/CLR> key to return to normal measurement.
The same logging function may be started and stopped at a fixed time and date
(see the Logging
function on page 88 and the respective settings on page 17)
.
Key 3 / TIME
In the menu it writes the number 3; in measurement it displays
the current time and date in the year/month/day format. The in-
dication disappears about 5 seconds after pressing the key
<3/Time>. The date and time may be modified in point 3) of the
menu: Time/date
(see page 22)
.
A1
b1
c1
Key 4 / SERIAL OUT
In the menu it writes the number 4; in measurement it enables the submenu for managing the opera-
tions connected with the RS232C serial output; the data are printed in table form. The functions that
can be activated with the three function keys F1, F2 and F3 are:
Screen
– key
<
F1
>
– unlimited continuous printing of the data just as they are shown on the display
at the time of starting the function,
RCD+
– key <F2> – same as
Screen
function, plus the indication of the maximum, minimum and
mean values up to a maximum of 100,000 samples,
ALL
– key
<
F3
>
– prints the 9 quantities A1, A2, …, C2, C3 and the internal temperature.
If an external power source is connected, letters
P
and
B
, or letter
P
only, flash as soon as the
Screen
function or the ALL function is started; when the
RCD+
function is started, letters
B
,
P
and
R
flash and, while, in case an external power supplier is connected, letters
P
and
R
will flash. if an
external power source is connected.
To conclude the operation in progress, press the stop key F1
(see p. 86 and following).
Ti
A1
b1
c1
Ti
A1
b1
c1
3
TIME
4
SERIAL
OUT
