6
7
EN
3/ Connection / Setting of the stops
Tymoov F2
❶
Only connect the motor cables to the console
without a control point or intermediary
❷
Supply power to the console by connecting the
plug to the mains outlet
❸
Setting stops
Automatic
1st stop:
Set button A to position I or II, depending on the desired direction of rotation. Once the stop has
been reached, the motor will briefly activate once.
2nd stop:
Set button A to position I or II, applying the opposite setting to the 1st stop. Once the stop is
reached, the motor will briefly activate twice.
Semi-automatic
Depending on the installation of the motor and the shutter, determine whether buttons I and II control raising
(^) or lowering (v).
1st stop:
Set button A to position I or II, depending on the desired direction of rotation. Once the stop has
been reached, the motor will briefly activate once.
2nd stop:
Set button A to position I or II, applying the opposite setting to the 1st stop (*).
Once the stop is reached, position button A to STOP.
For the top stop: perform the following sequence using short presses (<1 second) on button A: ^ - Stop - ^ -
Stop, then hold ^ until the motor activates twice.
For the bottom stop: perform the following sequence using short presses (<1 second) on button A: v -Stop- v
-Stop- v - Stop, then hold v until the motor activates twice.
Manual
Depending on the installation of the motor and the shutter, determine whether buttons I and II control raising
or lowering.
Set button A to position I or II, depending on the desired direction of rotation (*).
Once the stop has been reached, toggle button A to the Stop position.
Store the top stop by performing the following sequence with button A: ^ - Stop - ^ - Stop then hold ^.
To store the bottom stop, perform the following sequence with button A : v -Stop- v -Stop- v - Stop, then
hold v.
The motor activates once when memorising the first stop, and twice for the 2nd.
❹
Disconnect the console
- Remove the plug from the mains outlet
- Disconnect the motor connection cord
- Reconnect the tubular motor to the mains supply (see instructions).
(*) Possible activation of stepwise mode (slow movement)
For the top stop, perform the following sequence with button A: ^ - Stop - v - Stop, then hold ^.
For the bottom stop, perform the following sequence with button A: ^ - Stop - v - Stop, then hold v.
Brown
Blue
Grey
Yellow / Green
Black
