4
5
EN
Tymoov FB
Tymoov FE
❶
Only connect the motor cables to the console
without a control point or intermediary
❷
Supply power to the console by connecting the
plug to the mains outlet
❸
Setting stops
Automatic
Not accessible
1st stop:
Set button A to position I or II, depending on the desired direction of rotation.
2nd stop:
Set button A to position I or II, applying the opposite setting to the 1st stop.
Semi-automatic
Not accessible
1st stop in automatic mode
Set button A to position I or II, depending on the desired direction of rotation.
2nd stop in manual mode
Set button A to position I or II, applying the opposite setting to the 1st automatic stop.
When the motor starts up, press button B twice briefly, and hold a 3rd press until you reach the desired
position, without releasing.
If necessary, fine-tune by pressing briefly on button B.
Set button A to STOP: the stops are saved.
Manual
Set button A to position I or II, depending on the
desired direction of rotation.
Set the stops on the motor using the adjusting
screws (see instructions for the motor)
Note: do not touch button B
1st stop:
Set button A to position I or II, depending on the desired direction of rotation.
Then, briefly press button B twice and hold the 3rd press until the desired position is reached, before
releasing.
If necessary, fine-tune by pressing briefly on button B.
2nd stop:
Set button A to position I or II, applying the opposite setting to the 1st stop.
Then, briefly press button B twice and hold the 3rd press until the desired position is reached, before
releasing.
If necessary, fine-tune by pressing briefly on button B.
Set button A to STOP: the stops are saved.
❹
Disconnect the console
- Remove the plug from the mains outlet
- Disconnect the motor connection cord
- Reconnect the tubular motor
to the mains supply (see instructions).
Brown
Blue
Grey
Yellow / Green
Black
Brown
Blue
Grey
Yellow / Green
Black
3/ Connection / Setting of the stops
