EN
14
15
The shutter will not be locked when these stops are subsequently reached.
The motor will reverse its direction slightly so that there is no force on the shutter.
4/ Starting up for the first time
> 3s
x 2
x 1
4.2.2
Setting 1 manual stop + 1 automatic stop
❶
Position the shutter
❸
Automatic stops
❹
The stops are set
Scroll step by step
❷
Setting the position of the manual stop
Press button B on the front panel
of the remote control, until the LED
flashes green.
Then, press and hold the
button for ~3 seconds
until the motor is activated
briefly
The motor
will be activated
briefly
The motor
will be activated
twice
Press the
button until
the shutter reaches the lower stop.
The stop position
will now automatically
be set.
> 3s
> 3s
x 1
x 2
4.2.3
Setting 2 manual stops
❶
Position the shutter
❷
Setting the position of the first stop (e.g. Upper manual stop)
❸
Setting the position of the second stop (e.g. lower manual stop)
❹
The stops are now set. Exit the settings mode.
Press the
button until the shutter is
in the required position, then press
to
stop it (*).
Press the
button until the shutter is
in the required position, then press
to
stop it (*).
To scroll step by step, briefly press then
release the
and
buttons at
the same time.
To scroll step by step, briefly press then
release the
and
buttons
at the same time.
Press button B on the front panel
of the remote control,until the LED
flashes green.
Then, press and hold
the
button for ~3
seconds until the motor is
activated briefly. The upper
manual stop will now be set.
The motor
will be activated briefly.
Press the
button
to move the shutter to the
required position, then
press
to stop it.
Press button B on the front panel
of the remote control, until the LED
flashes green.
Then press the
button
for ~ 3 seconds until the motor is
activated briefly.
The lower manual stop will now
be set.
When the setting of
the 2nd stop is completed,
the motor will validate by
activating itself twice.
Scroll step by step
(*) The shutter may move in the opposite direction to the pressed-on button.
This will automatically be corrected after the 2 stops are recorded, which will be done systematically:
- by pressing for 3 seconds on
, for the upper stop,
- by pressing for 3 seconds on
, for the lower stop,
even if the buttons are reversed.
(*) The shutter may move in the opposite direction to the pressed-on button.
This will automatically be corrected after the 2 stops are recorded, which will be done systematically:
- by pressing for 3 seconds on
, for the upper stop,
- by pressing for 3 seconds on
, for the lower stop,
even if the buttons are reversed.
