EN
24
25
15/ Setting stops from the push button (local control)
15.1 Recording 2 automatic stops
Press and hold the push button (> 2 seconds)
so that the motor operates in the up or down
direction.
When the motor detects the 1st stop (upper or
lower), then the motor operates once.
Press and hold the push button (> 2 seconds) so
that the motor operates in the opposite direction.
When the motor detects the 2nd stop (upper or
lower), then the motor operates once.
> 2s
x 1
OR
> 2s
x 2
OR
15.2
Recording firstly an automatic stop then a manual stop
Press the push button (> 2 seconds) so that the
motor operates in the up or down direction.
When the motor detects the 1st stop (upper or
lower), then the motor operates once.
> 2s
x 1
OR
x 3
+
> 2s
> 2s
x 2
+
> 2s
x 2
STOP
OR
Press the push button (> 2 seconds) so that the
motor operates in the opposite direction.
Briefly press the push button to stop the motor at
the position corresponding to the manual stop.
Then,
- if the shutter is down: briefly press the push
button 3 times, then press and hold the push
button (> 2 seconds)
- if the shutter is up: briefly press the push button
2 times, then press and hold the push button (> 2
seconds)
The motor then operates twice to confirm that the
2nd stop is recorded.
