EN
20
21
11/ Favourite positions
You can save up to 2 favourite positions:
and
.
❶
❷
Set the shutter to the required position.
❸
Press
and
for 3 seconds to save the position.
The shutter will be activated briefl y to confi rm the association.
Release.
Repeat the operations for the 2nd favourite position.
> 3s
12/ Association with an alarm control unit
>5s
Bip
ON OFF
>5s
Bip
ON
Bip
> 3s
CR 2430
x 2
In order for the intruder detector to function, the lower stop must
automatically lock the shutter with fasteners.
The motor can be associated with an alarm control unit in the intruder detection
mode (attempt to raise shutter).
To confi gure the intruder mode:
• Associate the motor intruder mode with the alarm control unit.
• Defi ne the motor’s operating mode.
Intruder surveillance will only be active if the alarm is activated and
the shutter closed.
12.1 Associating the motor intruder mode with the alarm control
unit
Set the alarm control unit to Maintenance mode, then to “Add product” mode.
❶
Set the alarm control unit to “Add product” mode.
❷
Associate the intruder mode with the alarm control unit
Press button B on the front
panel of the remote control
twice
, until the LED fl ashes
orange.
Then, press and hold the
button for ~3 seconds until the
motor is activated briefl y.
The alarm control unit will beep.
The alarm control unit will beep.
The roller shutter will be briefl y
activated twice.
The motor intruder
mode is associated with
the alarm control unit.
This function is only available with the Radio Performance DxRP and xRP motors
Not compatible with Radio Effi cacité RE motors.
