EN
6
7
1/ Motor fitting
.................................................................................................
8
1.1 Crown and wheel assembly ................................................................................. 8
1.2 Assembly in the tube ............................................................................................... 8
1.3 Motor head position ................................................................................................ 9
1.4 Attaching the motor to the mount .................................................................... 9
2/ Connection ................................................................................................10
2.1 Wiring without push button, only by transmitter .................................. 10
2.2 Wiring with a push button ................................................................................. 10
3/ Starting up for the first time
...............................................................11
3.1. Associating.the.first.remote.control.to.a.motor
...................................... 11
3.2 Setting stops ............................................................................................................. 12
4/ Modifying stops ......................................................................................
16
5/ Associating another transmitter .......................................................
16
6/ Associating a smoke detector
............................................................17
7/ Grouped command .................................................................................17
8/ Remove one or several associations
................................................
18
8.1 Remove the remote control association with the motor .................... 18
8.2 Remove all associations ...................................................................................... 18
9/ Obstacle detection .................................................................................19
10/ Factory reset .........................................................................................19
11/ Favourite positions ..............................................................................20
12/ Association with an alarm control unit ........................................21
12.1 Associating the motor intruder mode with the alarm control unit 21
12.2.Defining.the.motor’s.operating.mode.
......................................................... 22
13/ Your remote control is lost or not functioning..........................23
13.1 From a new remote control .............................................................................. 23
13.2 From the push button .......................................................................................... 23
14/ Troubleshooting ....................................................................................24
Contents
• Power supply: 230V - 50 Hz +/- 10%
• Class II insulation
• Operating time: 4 minutes
• Electrical power :
TYMOOV 10RP / RE / D10RP: 60 W
TYMOOV 20RP / RE / D20RP: 90 W
• X3D radio frequency: 868.7 MHz to 869.2 MHz
• Maximum wireless power < 10 mW Category 2 receiver
• Radio range: 100-300 metres in an open field, variable depending on the
associated equipment (the range can vary depending on the installation conditions
and the electromagnetic environment)
• Number of associated transmitters: 16 maximum
•
A-weighted sound pressure level: LpA ≤ 70 dB(A).
• Degree of protection: IP 44
• Operating temperature: -20°C -> + 60°C
Technical Characteristics
