11
Customer Service Tel. (646) 435-8726
www.DeltaChildren.com
ATTACHING GRACO CAR SEATS
®
Car Seat Back Locking Tab Locks
Under The Back Of The Adapter
When In A Fully Locked Position
Car Seat In A Fully
Locked Position
2
Securing Car Seat With Velcro Straps-
Final step to secure the footrest side of car seat onto stroller, use the straps
with velcro to secure seat onto stroller. (Fig. 2F). Check that car seat is
securely attached by pulling up on the car seat. To remove, undo latches and
unlock car seat from adapter.
Removing Car Seat -
To remove, squeeze release handle at back of infant
restraint and lift upward out of adapter.
Car Seat Adapter -
Correct Placement
Car Seat Adapter Clicks And Locks
On Both Sides Of The Stroller Frame
When In A Fully Locked Position
Front
Back
Insert On
Both Sides
Fig.2C
Fig. 2D
Attaching Car Seat Adapter:
Graco Car Seat Side Locking Tabs Lock
Into This Area On The Adapter
Locking Tabs
Located On Both Sides
Of Car Seat
Car Seat Locking Tabs
Lock On Both Sides When
In A Fully Locked Position
Fig. 2E:
Fig. 2F
Securing Car Seat With Velcro Straps:
Graco SnugRide® Click Connect™ 30, 35, and 40
Attaching Graco Car Seats- SnugRide® Click Connect™
30, 35
and 40:
BEFORE YOU START:
Lock the rear wheels (Fig. 2). Remove child bar
(Fig. 2A). Install Car Seat Adapter Clips --
see pg. 8 for full instructions
(Fig. 2B).
ATTACHING CAR SEAT:
Attach the car seat adapter to the
stroller frame (Fig. 2C) until it clicks into a fully locked position (Fig. 2D).
Place car seat into car seat adapter until it “CLICKS” into a fully locked
position. Graco car seats “CLICK” and lock on the back and both sides
of the adapter when in a fully locked position (Fig. 2E). Make sure car
seat is fully fastened by pulling upward.
®
Fig. 2A
Fig. 2
Fig. 2B
BEFORE YOU START
LOCK REAR WHEELS
LOCK REAR WHEELS
Release
button
REMOVE CHILD BAR
REMOVE CHILD BAR
(See pg. 8)
INSTALL
INSTALL
CLIPS
CLIPS
