6
Customer Service Tel. (646) 435-8726
www.DeltaChildren.com
ASSEMBLY
FRONT
WHEEL
REAR
WHEEL
2
3
4
INSTALLING & REMOVING FRONT & REAR WHEELS
• To install front wheels:
While holding release button, push each
front wheel into the front wheel housing until you hear a ‘CLICK’. Ensure it is
securely attached to the stroller before use. (Fig. 2)
• To install rear wheels:
While holding release button, push each
rear wheel into the rear wheel housing until you hear a ‘CLICK’. Ensure it is
securely attached to the stroller before use. (Fig. 2)
• To remove the front wheels
: Locate the release button which can be
found on the wheel housing (Fig 2A).
• While pushing the release button, gently remove the wheel from housing
(Fig. 2B).
• To remove the rear wheels
: Locate the release button which can be
found on the wheel housing (Fig 2A).
• While pushing the release button, gently remove the wheel from housing
(Fig. 2B).
Release
Button
Release
Button
Fig. 2
Fig. 2A
Fig. 2
Fig. 2A
Fig. 2B
INSTALLING & REMOVING CANOPY
• To install canopy:
Locate canopy grooves at sides of stroller frame, and
slide both sides of canopy down until secure (Fig. 2).
• Locate button snaps along farthest edge of canopy and snap around all
sides (Fig. 2A)
NOTE:
There are a total of six (6) button snaps needed to fully secure canopy.
• Locate canopy slit and knob on frame and secure (Fig. 2B)
• To remove canopy:
Follow these steps in reverse.
Front
Back
x6
INSTALLING & REMOVING CHILD BAR
• To install child bar:
Align the child bar with the socket on the frame (Fig. 4) and insert until you hear a ‘CLICK’. Child bar is properly inserted when
release buttons are in the raised position (Fig. 4A).
• To remove child bar:
Push in release buttons located at child bar conneciton points (Fig. 4A) and pull the child bar away from the stroller frame.
• To remove fabric for cleaning:
Undo velcro at end of child bar, unzip, and remove (Fig. 4C).
REMOVING
CLEANING
INSTALLING
Fig. 4
Fig. 4A
Fig. 4B
Fig. 4C
Release
button
Release
button
Velcro
Zipper
