12
Customer Service Tel. (646) 435-8726
www.DeltaChildren.com
ATTACHING EVENFLO CAR SEATS
®
Evenflo Nurture™ and Embrace™
®
Attaching Evenflo Car Seats - Evenflo® Nurture™ and Embrace™
-
BEFORE YOU START:
Lock the rear wheels (Fig. 3). Remove child bar
(Fig. 3A). Install Car Seat Adapter Clips --
see pg. 8 for full instructions
(Fig. 3B).
ATTACHING CAR SEAT:
Attach the car seat adapter to
the stroller frame (Fig. 3C) until it clicks into a fully locked position
(Fig.3D). Place car seat into car seat adapter until it “CLICKS” into a
fully locked position. Evenflo car seats “CLICK” and lock on the back of
the adapter when in a fully locked position (Fig. 3E). Make sure car seat
is fully fastened by pulling upward.
®
3
Evenflo Car Seat
Fully Locked Position
Securing Car Seat With Velcro Straps-
Final step to secure the footrest side of car seat onto stroller, use the straps
with velcro to secure seat onto stroller. (Fig. 3F). Check that car seat is
securely attached by pulling up on the car seat. To remove, undo latches and
unlock car seat from adapter.
Removing Car Seat -
To remove, squeeze release handle at back of infant
restraint and lift upward out of adapter.
Fig. 3C
Car Seat Adapter -
Correct Placement
Car Seat Adapter Clicks And Locks
On Both Sides Of The Stroller Frame
When In A Fully Locked Position
Front
Back
Fig. 3D
Attaching Car Seat Adapter:
Evenflo Locking Latch
Locks Under Center
Of Adapter When In A
Fully Locked Position
Fig. 3E
Fig. 3F
Insert On
Both Sides
Fig. 3A
Fig. 3
Fig. 3B
BEFORE YOU START
LOCK REAR WHEELS
LOCK REAR WHEELS
Release
button
REMOVE CHILD BAR
REMOVE CHILD BAR
(See pg. 8)
INSTALL
INSTALL
CLIPS
CLIPS
