8
SECTION 2: CASE ASSEMBLY
STEP 3
X
X
S
N
W
2a. INSTALL THE RIGHT SIDE PANEL (PART N) BY ALIGNING THE TABS ON
ALL OF THE INSTALLED PIECES WITH THE SLOTS IN THE SIDE PANEL. IT IS
TYPICALLY EASIEST TO START WHERE THE SIDE PANEL MEETS THE TOP
AND WORK TO THE BOTTOM SUPPORT RAILS.
2b. INSTALL (4) LONG BOLTS (PART X) THROUGH THE SIDE PANEL, TIGHTEN
WITH THE M4 ALLEN WRENCH.
2. FINISH THE ATTACHMENT OF THE RIGHT
SIDE PANEL BY INSTALLING (2) SHORT
BOLTS (PART W) AS SHOWN, TIGHTEN WITH
THE M4 ALLEN WRENCH.
1. INSERT (2) UPPER SUPPORT RAILS
(PART S) INTO THE SLOTS IN THE
FRONT POST OF THE CENTER FRAME.
