7
SECTION 2: CASE ASSEMBLY
STEP 2
FIG 2
FIG 3
S
R
M
X
X
2a. INSERT THE TABS ON THE END OF THE CENTER FRAME (PART M) INTO THE SLOTS IN
THE RAILS ON THE TOP. BE SURE THE DRAWER GUIDES ARE IN THE SAME DIRECTION AS
THOSE ON THE SIDE PANEL. INSERT THE UPPER SUPPORT RAILS INTO THE SLOTS ON
THE CENTER FRAME. TAKE CARE NOT TO SCRATCH THE FINISH.
2b. INSTALL (2) BOTTOM SUPPORT RAILS (PART R) BY INSERTING THE TABS ON THE
BOTTOM SUPPORT RAILS INTO THE SIDE PANEL AND INSERTING THE TABS ON THE
CENTER FRAME INTO THE BOTTOM SUPPORT RAILS. SEE FIGURE 2.
2c. INSTALL (2) LONG BOLTS (PART X) THROUGH THE SIDE PANEL. TIGHTEN WITH THE M4
ALLEN WRENCH.
2d. INSTALL (2) LONG BOLTS (PART X) THROUGH THE CENTER FRAME, TIGHTEN WITH THE
M4 ALLEN WRENCH. SEE FIGURE 3.
1. INSERT (2) UPPER SUPPORT RAILS
(PART S) INTO THE SLOTS IN THE
FRONT POST OF THE SIDE PANEL.
